2.2.22 Carregar
Aprenda as regras mais importantes de segurança e transporte de carga de forma simples. Concentre-se na segurança, equilíbrio, visibilidade e estabilidade do veículo.
🚗 Carga de telhado e caixas de telhado
Efeitos importantes
- Centro de gravidade move-se para cima
- Veículo fica instável nas curvas
- Mais sensível a ventos cruzados
- A distância de frenagem aumenta
- A aceleração fica mais lenta
- O consumo de combustível aumenta
Lembre-se sempre
- Nunca exceda o limite de carga do telhado
- Proteja a bagagem com cuidado
- Evite alta velocidade
- Verifique as fixações durante as pausas
- A estabilidade de direção piora nas curvas
🏍 Carregamento de motocicleta
Erros perigosos
- Muito peso traseiro → oscilação
- Carga lateral irregular → manuseio instável
- Bagagem alta → efeito de vento cruzado mais forte
- Carregamento ruim → vibração e balanço
Comportamento Correto
- Distribua a bagagem uniformemente
- Aumente a pressão dos pneus, se necessário
- Ajustar suspensão/chassis
- Siga os limites de velocidade do fabricante
- Itens pesados baixos, itens leves altos
📦 Proteção de carga
Ferramentas de segurança corretas
- Correias tensoras
- Redes de segurança
- Tapetes antiderrapantes
Você deve garantir
- A carga não pode escorregar ou cair
- Nenhum ruído evitável
- Segurança do veículo não afetada
- A direção permanece controlável
Se a pulseira estiver danificada
- Substitua imediatamente
- Continue apenas com proteção segura
- O motorista é responsável
🚨 Regras de carga pendente
| Regra | Exigência |
|---|---|
| Saliência traseira ≤ 100 km | Máximo 3 metros |
| Saliência traseira > 100 km | Máximo 1,5 metros |
| Saliência frontal | Máx. 50 cm acima de 2,50 m de altura |
| Marcação Noturna | Luz branca dianteira, luz vermelha traseira |
| Projeção Lateral | Marque se > 40 cm de luzes externas |
🚛 Caminhões, vans e reboques
Fatos importantes
- Carga pesada nas costas causa movimento do pêndulo
- Carga irregular afeta a frenagem e a direção
- Observe os limites de carga por eixo
- Use plano de distribuição de carga
- Comprimento total máximo do trem: 20,75 m
Regras Especiais
- Mercadorias perigosas precisam de certificado ADR
- Caminhão que transporta lixo usa placa preta com “A”
- Motorista e titular são responsáveis
- Carga segura durante frenagens e curvas
🧠 Truques fáceis de memória
Carga alta = alto perigo → Centro de gravidade mais alto = menos estabilidade.
Itens pesados baixos → Melhor equilíbrio e travagem mais segura.
Carga solta mata → Prenda sempre com cintos, redes ou tapetes antiderrapantes.
Carga no telhado = mais vento → Dirija mais devagar em curvas e ventos laterais.
❓ Teste rápido
1. O que acontece com a bagagem de teto?
✔ O centro de gravidade aumenta e a condução torna-se instável.
2. Quais ferramentas protegem a carga?
✔ Cintos tensores, redes, tapetes antiderrapantes.
3. Quais cores de luzes marcam a carga saliente?
✔ Frente branca, traseira vermelha.
4. O que acontece com o carregamento pesado na parte traseira da motocicleta?
✔ Direção oscilante e instável.
Perguntas de Prática (10)
-
Pergunta 1 de 10
How must a load be marked in darkness or bad visibility when it extends laterally more than 40 cm beyond the side lights of the vehicle?
2.2.22-1083 PontosExplicação
In the dark or in poor visibility conditions, a cargo that laterally protrudes more than 40 cm beyond the marker lights of the vehicle must be marked with additional lights. These are to be attached laterally no more than 40 cm from the edge and no more than 1.5 m above the roadway. For the front, a white lamp is required, for the back you need to install a red light. The hazard lights must not be switched on by you as a car driver while driving.
-
Pergunta 2 de 10
What is the maximum height allowed above the roadway for a red light marking a load extending to the back?
2.2.22-1093 PontosExplicação
The maximum height for attaching the lamp is 1.5 meters. This is to ensure that the marking is in the field of vision of other road users. If the red light is higher above the road, it could be overlooked.
-
Pergunta 3 de 10
Up to what height is a load not allowed to project over the front of the vehicle?
2.2.22-1113 PontosCorreto: 2
Explicação
The red lamp, which marks the rear projecting cargo, may be installed at a maximum height of 2.50 m. If it were higher, other road users might oversee it. To prevent a hazard, a maximum height of 2.50 m is set.
-
Pergunta 4 de 10
What should be noted when loading vehicles?
2.2.22-1173 PontosExplicação
Cargo may protrude above a height of 2.50 m forward up to 50 cm above the vehicle. If the load protrudes more than 1 m beyond the rear reflectors of the vehicle, the end must be visually marked. Cargo needs to be secured carefully. Back-heavy loading causes dangerous pendular movements when driving faster. For motorcycles, ensure that the load is evenly distributed on the sides.
-
Pergunta 5 de 10
When is a centrifugal force exerted on the load of a truck?
2.2.22-1203 PontosExplicação
The centrifugal force affects your truck when cornering. go straight brakes or have no circular motion and are therefore not decisive.
-
Pergunta 6 de 10
How far may a labelled load protrude beyond the rear of your vehicle if your journey is more than 100 km?
2.2.22-1292 PontosCorreto: 1
Explicação
For distances up to 100 Kilometers, the load is allowed to overhang up to 3 meters. For distances over 100 Kilometers, the load is allowed to overhang up to 1.50 meters to the rear.
-
Pergunta 7 de 10
Which warning plate is correctly mounted?
2.2.22-2012 Pontos
Explicação
As we need an A for (attention) the right warning sign is in place.
-
Pergunta 8 de 10
What should be taken into consideration when selecting load-securing lashing equipment?
2.2.22-2233 PontosExplicação
Among other things, the face and shape of the load are decisive for the selection of suitable and necessary lashing equipment. Equally important are the requirements of the vehicle, such as the permissible payload and the attachment points.
-
Pergunta 9 de 10
You want to secure your load by lashing it down. What should you bear in mind?
2.2.22-2243 PontosExplicação
When lashing down, the load is pressed onto the loading area using lashing devices to increase the friction force and prevent slipping. It is important to check the tension of the lashing devices, as the necessary contact force and thus the required friction can only be achieved with sufficient tension. In addition, this method is only suitable for dimensionally stable loads; flexible goods can deform under the tension, which means that the pre-tensioning force is lost and load securing is no longer guaranteed.
-
Pergunta 10 de 10
When must attached working equipment be marked with red-white warning plates?
2.2.22-3033 PontosExplicação
A red and white warning board is then to mount when it protrudes rearward more than 1 m on the rear lamps of the tractor if it has traffic hazardous parts and also when it laterally by more than 40 cm beyond the boundary or rear lamps of the tractor protrudes. All three are correct.