1.2.22 Load
Visibility & Securing
- Load must be carefully secured according to engineering rules so it cannot fall.
- The driver's visibility must not be handicapped by the load.
- Permissible dimensions and weight limits must always be observed.
Rear Protrusion
- If cargo protrudes more than 1 meter from the rear, it must be marked.
- Marker required: A red light and a red reflector.
- Do NOT use the rear fog lamp to mark load.
- As a following driver: If you see marked cargo, increase your safety distance.
Front Protrusion
- Cargo may protrude forwards by a maximum of 50 cm.
- Important Condition: Only allowed if the cargo is at a height above 2.5 meters.
- Why? To minimize the risk of injury in the event of a rear-end collision.
Weight Limits
Never exceed the maximum permissible load or axial limits.
Risks of Overloading:
- Negatively affects driving behavior and center of gravity.
- Can cause permanent damage (warping/breaking load-bearing parts).
Hazardous Materials
Vehicles loaded with dangerous goods must display an orange warning sign.
- Purpose 1: Warns other drivers in traffic.
- Purpose 2: Serves as a crucial clue for emergency services in the event of an accident.
Good luck with your driving exam! Keep these key figures (1m, 2.5m, 50cm) in mind.
Practice Questions (7)
-
Question 1 of 7
What is the maximum distance a load may project backwards beyond the rear reflectors without a projection marker being necessary?
1.2.22-1012 PointsCorrect: 1
Explanation
The lighting or the brake light signals the end of the vehicle. With this, you estimating the correct safety distance. If a protruding object of the vehicle in front of you is visually marked, it protrudes at least one meter. You should take this into account in your assessment of the necessary safety distance and increase it accordingly.
-
Question 2 of 7
How must a load projecting more than 1 m beyond the rear reflectors of the vehicle be marked in darkness?
1.2.22-1023 PointsExplanation
If you carry cargo that protrudes more than 1 m from the end of the vehicle, it must be marked accordingly by a red light and a red reflector. Thus, the end of the load is made visible to the traffic behind you and a correspondingly high safety distance can be maintained. An orange warning sign shows the transport of dangerous goods subject to marking. The rear fog lamp does not improve the visibility and must not be used.
-
Question 3 of 7
What can be the effect of an overload of only 20%?
1.2.22-1044 PointsExplanation
The entire vehicle design, the drivability and the center of gravity of a car are matched and tested by the manufacturer to a certain maximum permissible load limit. Exceeding the maximum limit can affect the driving behavior of the vehicle negatively. In addition, you risk permanent damage, such as warping and breaking load-bearing parts on your car.
-
Question 4 of 7
What is the significance of orange warning plates on a vehicle?
1.2.22-1063 PointsExplanation
An orange warning sign indicates vehicles that are loaded with dangerous goods as so-called hazardous materials transportation. Other car drivers should be warned this way. In the event of a traffic accident, the orange warning sign serves as a clue to the emergency services.
-
Question 5 of 7
What must you be aware of if you want to transport a load?
1.2.22-1073 PointsExplanation
The load must be carefully secured so that it can't fall down. The car driver may not be handicapped by the load, not even in his/her visibility. The permissible dimensions and weight limits must be observed. At the front, the load may protrude only above a height of 2.5 m by a maximum of 50 cm. This regulation reduces the risk of injury in the event of a rear-end collision.
-
Question 6 of 7
From what height it is permitted for loads to project up to 50 cm in front of your vehicle?
1.2.22-1083 PointsExplanation
If your vehicle has a height of up to 2.5 m, the cargo may protrude forwards by 50 cm. This cargo projection up to 50 cm is also permitted on trains and must never be exceeded in order to minimize the risk of injury in rear-end collisions.
-
Question 7 of 7
What do you have to make sure of regarding the load on your vehicle?
1.2.22-1093 PointsExplanation
When loading your vehicle, you must not exceed the permissible axial loads. You must secure the cargo in accordance with the recognized rules of engineering