1.5.01 Environmental protection
Learn how to drive in an environmentally friendly, fuel-saving, and quieter way for the German driving theory exam.
Main idea
Environmentally friendly driving means: drive smoothly, avoid unnecessary trips, keep engine speeds low, maintain your vehicle correctly, and avoid wasting fuel.
Important rules for the exam
Drive in the low-speed range
The engine consumes the least fuel just above the minimum speed. Shift up early and avoid high engine speeds.
Turn off the engine when waiting
Turn off the engine during longer waiting times such as traffic jams or railway crossings. Do not switch it off at a stop sign.
Drive smoothly and anticipatorily
Avoid unnecessary braking and acceleration. Let the vehicle roll when possible and keep a constant speed.
Avoid unnecessary trips
The best environmental protection is driving less. Carpooling and avoiding short trips help reduce emissions.
Vehicle maintenance
Correct tire pressure
Tire pressure affects rolling resistance. Too little pressure increases fuel consumption, tire wear, and pollution.
Regular maintenance
A well-maintained vehicle uses less fuel and produces fewer emissions.
Low-friction oil
Special low-friction oils reduce engine friction and save fuel. Use only approved oils.
Check for smoke or oil loss
Smoke or leaking oil harms the environment. Have the vehicle checked in a workshop.
Noise and emissions
Avoid high engine speeds
Higher engine speeds create more noise and consume more fuel.
Defective mufflers increase noise
Loud or modified exhaust systems pollute the environment with unnecessary noise.
Winter tires in summer
Winter tires wear out faster in warm weather and increase fuel consumption.
Easy eco-driving tips
✔ Shift up early
Avoid driving with high engine revolutions.
✔ Drive at constant speed
Cruise control can help save fuel.
✔ Remove unused roof racks
Less air resistance means lower fuel consumption.
✔ Turn off air conditioning when possible
Air conditioning increases fuel consumption.
Hazardous waste
Oil pollution
Even one drop of oil can contaminate up to 600 liters of water.
Dispose correctly
Waste oils, batteries, and lubricants are special waste and must never go into household trash.
Common exam traps
❌ Wrong:
Warm up the engine while standing still.
✔ Correct:
Drive off immediately in the low-speed range.
❌ Wrong:
Turn off the engine at every stop.
✔ Correct:
Turn it off only during longer waiting times.
❌ Wrong:
Driving fast saves time and fuel.
✔ Correct:
High speeds greatly increase fuel consumption and noise.
Mini quiz
When should you switch off the engine?
During longer waiting times such as traffic jams or railway crossings.
What saves more fuel: constant speed or constant acceleration and braking?
Driving at a constant speed saves more fuel.
Why is correct tire pressure important?
It reduces rolling resistance, fuel consumption, and tire wear.
Should you warm up the engine while standing still?
No. You should drive off directly after starting.
Final checklist
Practice Questions (24)
-
Question 1 of 24
What happens as a result of tyre pressures being well below the recommended levels?
1.5.01-0043 PointsExplanation
Too low air pressure in the tire as well leads to increased fuel consumption. The effort required to keep the tire running is significantly higher than when the tire pressure has been set correctly. This leads to higher wear on the tire, increased fuel consumption and harms the environment.
-
Question 2 of 24
Your vehicle loses oil. How much drinking water can be polluted by a single drop of oil?
1.5.01-0064 PointsExplanation
You should urgently avoid oil loss. Because even a single drop of oil can contaminate up to 600 liters of water and make it unfit for consumption.
-
Question 3 of 24
What must you remember when refuelling?
1.5.01-0073 PointsExplanation
Inhaling fuel vapors is harmful to your health. Therefore, make sure that the dispenser is being used correctly and pay attention to any defects when refueling. When the tank is full, the automatic system should be switched off. This prevents the overflow of gasoline or diesel. In addition, some air must remain in the tank for the fuel to expand.
-
Question 4 of 24
Where can used oil, lubricants and car batteries be taken to be disposed of properly?
1.5.01-0103 PointsExplanation
Waste oils, lubricants and vehicle batteries can be disposed of properly in the recycling center or via the car repair shop. Never should these substances be disposed of with household waste. It is special waste.
-
Question 5 of 24
What measures help protect the environment?
1.5.01-0143 PointsExplanation
Turning the air conditioning off saves fuel as well. Low rolling resistance tires are designed for lower rolling resistance and can save fuel. Low-friction oils are synthetic oils with improved flow behavior, the so-called viscosity. This lubricates the engine faster and better and reduces friction. This also leads to a noticeable saving of fuel. Only oils approved by the engine/vehicle manufacturer should be used to prevent engine damage.
-
Question 6 of 24
What can regular vehicle maintenance help achieve?
1.5.01-0163 PointsExplanation
Regular vehicle maintenance helps to ensure road safety, low fuel consumption and low emissions.
-
Question 7 of 24
In which situations should you switch off the engine to save fuel and reduce environmental pollution?
1.5.01-0173 PointsExplanation
You should turn off the engine before a gated railway crossing or if you are in a traffic jam, as you cannot accurately estimate the length of the waiting time. This way you can reduce your environmental impact and save fuel at the same time.
-
Question 8 of 24
How do you drive with consideration to the environment?
1.5.01-1103 PointsExplanation
Avoid constant acceleration and braking. Accelerating consumes unnecessary fuel and can be avoided, for example, in front of red lights by laying off the gas pedal. Maximum acceleration leads to high pollutant emissions and high noise as well as environmental pollution.
-
Question 9 of 24
What can help save fuel and reduce pollution?
1.5.01-1143 PointsExplanation
Before buying a car, the driver can check which model consumes little fuel. In addition, economical driving also contributes to savings.
-
Question 10 of 24
What can you do to help protect the environment?
1.5.01-1153 PointsExplanation
The best way to protect the environment is to drive less. All journeys that are not absolutely necessary should be avoided. Certain driving styles consume extra fuel: Short-distance driving, especially when the engine is still cold, stop-and-go traffic, for example in crowded inner cities and searching for a parking space. On top of that, in areas with heavy traffic, the risk of smog from the exhaust emissions of vehicles increases. Driving at full throttle will not only cause noise, but your fuel consumption will increase disproportionately. However, once you are only 20% below the maximum speed, you reduce your fuel consumption by about 40%. Carpooling is also good for the environment.
-
Question 11 of 24
Why is it beneficial to use low viscosity engine oil?
1.5.01-1183 PointsExplanation
Low-friction oils are characterized by a better flow behavior. These are synthetic oils that reduce friction in the engine through their improved viscosity and optimize oiling. This saves fuel. When using low-friction oils, attention must be paid to the approval of the manufacturer of the engine or vehicle.
-
Question 12 of 24
How can you minimise tyre wear?
1.5.01-1213 PointsExplanation
Driving with winter tires in non-winter weather leads to increased tire wear. Strong acceleration is associated with increased abrasion. The tire pressure recommended by the vehicle manufacturer must be observed. Too little tire pressure increases the tire wear considerably. If the air pressure is too low, the tire will deform more with each rotation than with correct tire pressure. Thereby the fabric layers of the tires rub against each other. Heat can be generated that irreparably damages the tire.
-
Question 13 of 24
What vehicles are generally exempt from the ban on road traffic in "environmental zones"?
1.5.01-1223 PointsExplanation
A traffic ban for "environmental zones" does not apply to ambulances that are on duty. Also not affected are tractors from agriculture and forestry.
-
Question 14 of 24
You are driving through city traffic in rush hour. What are the effects of stop-and-go driving?
1.5.01-1243 PointsExplanation
The fuel consumption in stop-and-go traffic is greater, because drivers have to brake and accelerate more often. This leads to more exhaust fumes and other road users may be disturbed.
-
Question 15 of 24
What is a pre-condition for environmentally-friendly and energy-saving driving?
1.5.01-1253 PointsExplanation
Tyre pressure has a major impact on fuel consumption as it affects rolling resistance. Regular vehicle maintenance contributes to low fuel consumption and emissions.
-
Question 16 of 24
You are driving a motor vehicle with a manual gearbox. What style of driving results in higher fuel consumption within a built-up area?
1.5.01-1263 PointsExplanation
When accelerating hard, you consume more fuel than when accelerating normally. The higher the speed, the more fuel is consumed.
-
Question 17 of 24
You are driving a motor vehicle with a manual gearbox. How can you reduce the fuel consumption of your vehicle?
1.5.01-1273 PointsExplanation
The higher the engine speed, the more fuel is consumed. If you ride with foresight, you can avoid unnecessary acceleration and braking.
-
Question 18 of 24
How can you reduce the noise generated by your motor vehicle?
1.5.01-1283 PointsExplanation
The higher the engine speed, the louder the engine will be. Tyres have differences in quality. When buying tyres, pay attention to the rolling noise.
-
Question 19 of 24
What should you do to help protect the environment?
1.5.01-1293 PointsExplanation
The engine also burns fuel when stationary, you should switch off the engine if you stop for a longer period of time. If there are atypical signs, such as smoke, you should have your vehicle checked.
-
Question 20 of 24
You are driving a motor vehicle with a manual gearbox. When driving, what can cause avoidable noise pollution?
1.5.01-1303 PointsExplanation
The higher the engine speed, the louder the engine. Tuned exhaust systems are usually louder than the standard exhaust system. You will consume more fuel when accelerating hard than when accelerating normally.
-
Question 21 of 24
You are driving a motor vehicle with a manual gearbox on a level carriageway. How should you change gears so as to drive in a particularly environmentally conscious and economical way?
1.5.01-1313 PointsExplanation
When accelerating, always try to keep the engine speed as low as possible. When coasting, shift gears as late as possible to take advantage of the engine braking effect and use the brakes as little as possible.
-
Question 22 of 24
You are driving a motor vehicle with a manual gearbox. What type of behaviour pollutes the environment?
1.5.01-1323 PointsExplanation
Constant speed consumes less fuel than constant deceleration and acceleration. Unnecessary acceleration at red lights burns fuel unnecessarily.
-
Question 23 of 24
You are driving a motor vehicle with a manual gearbox. How can you achieve efficient fuel consumption?
1.5.01-1333 PointsExplanation
At constant speed, less is consumed than when constantly decelerating and accelerating. Tyre pressure has a major impact on fuel consumption as it affects rolling resistance.
-
Question 24 of 24
What should you consider after starting your vehicle?
1.5.01-1343 PointsExplanation
Unnecessary standing with the engine running unnecessarily pollutes the environment. Start the engine only when you want to drive off. The lower the engine speed, the less fuel is burnt.